24W/30W/36W/40W Desktop Series

Products > Power Adapter > 24W/30W/36W/40W Desktop Series

24W/30W/36W/40W Desktop Series

Min.Order Quantity: 5K PCS
Port: ShenZhen
Payment Terms: T/T,Western Union,PayPal
Porudct time: 10 to 15 working days or depending on the order
Package: Carton
2 years warranty

Contact purchase

shared：

Product details

SPECIFICATION
Output	SPEC MODEL NO.	VP-0504000	VP-0754000	VP-0904000	VP-1203000	VP-1502400	VP-1802000	VP-2401500
	DC VOLTAGE	5V	7.5V	9V	12V	15V	18V	24V
	RATED CURRENT	4A	4A	4A	3A	2.4A	2A	1.5A
	CURRENT RANGE	0-4A	0-4A	0-4A	0-3A	0-2.4A	0-2A	0-1.5A
	RATED POWER	20W	30W	36W	36W	36W	36W	36W
	RIPPLE & NOISE（MAX）	1%	1%	1%	1%	1%	1%	1%
	VOLTAGE TOLERANCE	±5%	±5%	±5%	±5%	±5%	±5%	±5%
	LINE REGULATION	1%	1%	1%	1%	1%	1%	1%
	LOAD REGULATION	±5%	±5%	±5%	±5%	±5%	±5%	±5%
	SETUP,RISE,HOLD UP TIME	500ms, 30ms / 230VAC 1000ms, 30ms / 115VAC at full load
Input	VOLTAGE RANGE	100-240V AC
	FREQUENCY	50/60HZ
	EFFICIENCY	82.0%	82.0%	82.0%	86.0%	87.0%	87.0%	88.0%
	AC CURRENT	0.9A / 115VAC 0.45A / 230VAC
	INRUSH CURRENT (max.)	30A / 115VAC 55A / 230VAC
	LEAKAGE CURRENT (max.)	Touch current < 50μA/264VAC
Protection	OVER LOAD	105 ~ 170% rated output power
	OVER LOAD	Protection type : Hiccup mode, recovers automatically after fault condition is removed
	OVER VOLTAGE	5.25 ~ 7.5V	7.88-10.5V	9.45-13V	12.6-17.2V	15.75-20.25V	18.9-25.2V	25.2-32.4V
	OVER VOLTAGE	Protection type : Shut down o/p voltage, re-power on to recover
ENVIRONMENT	WORKING TEMP.	0 - +50℃
	WORKING HUMIDITY	20% ~ 90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-20 - +85℃,5 to 95% RH
	TEMP. COEFFICIENT	0.03% /°C (0 ~ 40℃ )
	VIBRATION	10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC	SAFETY STANDARDS	UL 60950-1 CSA-60950-1 IEC 60950-1 EN 60950-1 EN61347
	WITHSTAND VOLTAGE	I/P-O/P:KVDC
	ISOLATION RESISTANCE	I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH ℃
	EMC STANDARDS	Compliance to EN55022 class B, EN61000-3-2,3, EN55024
	EMC STANDARDS	Compliance to FCC part15 class B
OTHERS	MTBF	650Khrs min. MIL-HDBK-217F (25 °C)
	DIMENSION(LWH)	98 x 47 x 32 mm
	PACKING	160g 40pcs/carton
CONNECTOR	PLUG	See page 2 ; Other type available by customer requested
CONNECTOR	CABLE	See page 2 ; Other type available by customer requested
NOTE	1.All parameters are specified at 230VAC input, rated load, 25℃ 70% RH ambient. 2.DC voltage:The output voltage set at point measure by plug terminal&50% load 3.Ripple& noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1μf & 47μf capacitor. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Length of set up time is measured at first cold start.Turning ON/OFF the power supply may lead to increase of the set up time. 7.Derating may be needed under low input voltage.Please check the derating curve for more details. 8.The power supply is considered as an independent unit,but the final equipment still need to re-confirm that the whole system complies with the EMC directives.For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.votoo.com)